AK-Motion BMW F30 F32 F80 F82 Data Display - real-time BMW performance data for 3 Series, 4 Series, M3 and M4
Upgrade your BMW with the AK-Motion Data Display - the ultimate BMW vent-mounted digital gauge and touchscreen data monitor for F30 F31 3 Series, F32 F33 F36 4 Series, and F80 M3 and F82 M4. Perfect for 320i, 335i, 340i, M3 and M4, this sleek 3.5 inch colour touchscreen integrates neatly into the centre air vent to give you live engine data, boost, oil temperature, lambda, gearbox temperature, G-force, lap timing and much more at a glance.
This is the go-to BMW performance data display for enthusiasts, tuners and track-day drivers who want OEM-style integration with powerful customisation. We have fitted and used these displays on customer BMWs and the feedback has been consistently excellent - clear, fast, reliable data with a premium factory look and feel.
Note: Fits BMW E-series and F-series platforms. G-series vehicles are not supported. Functions vary depending on engine and model.
Why choose the AK-Motion BMW Data Display
- OEM-style vent fitment - clean, discreet and functional
- High-contrast 3.5 inch full colour touchscreen with matte anti-reflection film
- Customisable dashboards, shift lights, colours and units
- Reads, displays and logs key performance metrics and diagnostics
- Designed for BMW F30 F31 F32 F33 F36 F80 F82 - ideal for 320i, 335i, 340i, M3, M4
- Regularly updated and upgradable control unit firmware
Core features - live BMW performance data and control
- Activation and deactivation of Active Sound Design - F-series
- Activation and deactivation of DSC and DTC at start - E-series
- Control up to four relays
- Speedometer needle sweep on ignition
- Adjustable shift light - on display and optional cluster flash
- Air flow
- Automatic and manual brightness control
- Battery voltage
- Boost pressure - actual value
- Boost pressure - target value
- Charge air temperature - IAT
- Compensation of scaled maps - for N54, boost pressure above 1.5 bar
- Dashboard with eight freely selectable values
- Delete – R - F-series without cat code
- DPF differential pressure
- Driven distance since successful DPF regeneration
- Enable burble - F-series
- Enable diagnostic - OBD2 via Data Display
- Exhaust temperature - calculated
- Firing angle
- Flap control
- Freely selectable boot screen
- Freely selectable colour scale - for example oil temperature red, yellow, green
- Custom speed and timing measurement
- Freely selectable values as numeric or bar display - up to three
- Fuel pressure
- Full graphical touch display - 65,536 colours
- Gearbox temperature - automatic and DKG, E-series and F-series
- G-Force
- Ignition time
- Lambda value
- Lap time - distance and time
- OBD2 blocker function - unlock with freely selectable code
- Oil pressure - F-series, E-series with external sensor
- Oil temperature
- Optional external sensor support - oil temperature, oil pressure, exhaust temperature and more
- Power
- Pressure before DPF
- Rail pressure
- Read and delete engine error codes
- Save and reset max values
- Saves the last four timing measurements
- Select language and units - English, German, Italian, French, Dutch, Bar or PSI, PS or kW, Lambda or AFR, Celsius or Fahrenheit and more
- Soot mass DPF
- Speed - can be matched with GPS
- Timing 0 to 100
- Timing 100 to 200
- Timing 1/8 mile
- Timing 1/4 mile
- Timing 1/2 mile
- Torque
- Torque compensation value - for vehicles with chip tuning or power box
- Unit is updatable
- Up to four freely selectable parameters displayed in a flow diagram
- Wastegate position
- Water temperature
OPF delete function - M3 and M4 only
To use the OPF-delete function with this display, select the correct variant above. You need the cable shown in the images to install OPF-delete on BMW M3 and M4 Competition models equipped with OPF and the S55 engine.
OPF-delete installation outline:
- Step 1: Connect to the controller - solder pin 18 on the board
- Step 2: Cut the cable to length and connect to the controller - cable connector
- Step 3: Connect to the signal line of the OPF sensors - cable connector
What’s included
- Control unit
- 3.5 inch display with frame
- Cable set for vehicle connection
- Display cable
- 1 x USB cable for updating
- Matte anti-reflection film
- 2 x socket housings for rewiring the necessary vehicle cables
Compatibility - BMW F-series data display fitment
BMW M Series
- F80 M3 Saloon S55 - 2012 to 2015
- F80 LCI M3 Saloon S55 - 2015 to 2018
- F80 LCI M3 CS S55 - 2016 to 2019
- F80 LCI M3 Competition S55 - 2016 to 2019
- F82 M4 Coupe S55 - 2013 to 2017
- F82 LCI M4 Coupe S55 - 2016 to 2019
- F82 LCI M4 CS Coupe S55 - 2016 to 2019
BMW 3 Series and 4 Series
- BMW 3 Series F30 and F31 - LCI - all models - 2012 onwards
- BMW 4 Series F32, F33 and F36 - LCI - all models - 2014 onwards
OPF-delete is only available for M Series.
Installation and support
Professional installation recommended. For expert fitting, book with Nforcd in Warwickshire. Request a quote at Sales@nforcd.com.
Please supply your VIN when ordering so we can confirm the correct configuration for your car.
Part numbers
- AKMF8X1000.1 - LHD
- AKMF8X1000.2 - RHD
- AKMF8X1000.3 - LHD with OPF-delete
- AKMF8X1000.4 - RHD with OPF-delete
Manufactured by
AK-Motion
Why buy from Nforcd
We specialise in BMW performance parts and BMW data displays. We have installed and used the AK-Motion Data Display on customer cars including F30 320i, F30 335i, F30 340i, F80 M3 and F82 M4, and our customers love the clean OEM fit, the responsive touchscreen and the depth of live data. It is a proven upgrade for anyone searching for a BMW F30 data display, BMW F32 digital gauge, BMW F80 M3 vent display or BMW F82 M4 data monitor.
Photos
