BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB
BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB
BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB
  • Load image into Gallery viewer, BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB
  • Load image into Gallery viewer, BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB
  • Load image into Gallery viewer, BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB

BMS Dogbone Subframe Mount Stabiliser Insert, Pendulum/Lower Engine Torque Mount, VW Audi Seat Cupra Skoda MQB/MQB

£50.70
£50.70
£49.00
Sold out
Tax included. Shipping calculated at checkout.

Heads-up on cancellations & returns: if you cancel an order or return an item, you won't get back 100% of what you paid. We apply a 10% restocking fee, the outbound shipping is non-refundable, and we have to pass on Shopify / PayPal payment processing fees; these aren't returned to us when we refund you. International orders also lose on exchange-rate spread in both directions. If the original packaging is damaged or missing, a reboxing charge applies. For international orders specifically, if you refuse to pay our shipping invoice or supply a prepaid label after placing the order, the same deductions apply. We're upfront about this — please be sure of your purchase before ordering.

Lock down drivetrain movement and sharpen gear changes on your MQB or MQB Evo Volkswagen, Audi, Seat, Cupra or Skoda with this BMS dogbone subframe mount stabiliser insert. Manufactured from billet 6061 aluminium alloy, it fills the voids in the factory lower engine torque mount to reduce excessive movement, helping deliver crisper shifts, improved traction and more precise driving feel. A popular upgrade with Nforcd customers, it is designed for hard road use while transferring only minimal NVH into the cabin.

  • Billet 6061 aluminium lower engine mount insert for the dogbone torque mount
  • Reduces drivetrain movement for sharper gear changes and more direct response
  • Helps curb wheel hop and tyre slip under acceleration
  • Lightweight, durable and easy to install with basic tools
  • Minimal increase in NVH for everyday usability
  • Supplied with new M14x1.5x50 bolt for simple bolt-in fitting

Platform and engine suitability
Ideal for front wheel drive vehicles on MQB and MQB Evo platforms with 2.0 TSI, 1.8 TSI, 2.5 TFSI and 2.0 TDI engines. Please confirm your car uses OE subframe mount 5Q0198037F before ordering.

Vehicle fitment

  • Volkswagen 2020+ Golf Mk8, 2013-2020 Golf Mk7 and Mk7.5, 2017+ Arteon, 2017+ T-Roc, 2016+ Tiguan II, 2015+ Passat B8
  • Audi 2020+ A3 8Y, 2013-2020 A3 8V, 2021+ RS3 2.5 TFSI 8Y, 2017-2020 RS3 2.5 TFSI 8V.2 EVO, 2015-2017 RS3 2.5 TFSI 8V, 2014+ TT 3 8S, 2017+ TTRS 2.5 TFSI 8S, 2018+ Q2
  • Cupra 2020+ Leon IV FW, 2020+ Formentor VZ5 2.5 TFSI, 2020+ Formentor, 2018+ Ateca
  • Skoda 2020+ Octavia IV NX, 2014-2020 Octavia III 5E, 2015+ Superb III 3V, 2018+ Kodiaq vRS

Installation
Remove the lower motor mount bolt, place the insert into the mount, then refit the bolt using the supplied hardware.

What's included

  • 1 x billet subframe mount stabiliser insert
  • 1 x M14x1.5x50 bolt

Buy with confidence from Nforcd. If you would like this part professionally installed, fitting is available at Nforcd in Warwickshire. Request a quote via Sales@nforcd.com.