Chasing serious power from your S65 without overhauling the entire fuel system? Nforcd supplies the Fuel-It 650HP Low Pressure Fuel Pump upgrade for the BMW E90, E92 and E93 M3. This smart secondary in-tank LPFP works alongside the factory unit to deliver the extra fuel flow your tuned S65 needs, while keeping stock-like drivability. It is an add-on assembly that requires no modification to the OE pump bucket, wiring or plumbing, is easily reversible, and is designed so there are no iDrive warnings and no EKP issues.
- Fitment: 2008 to 2013 BMW M3 E90, E92, E93 with the S65 V8
- Supports builds targeting up to around 650 whp by adding a secondary pump in parallel with the stock LPFP
- Engages under boost to deliver additional low pressure fuel when required
- No cutting or permanent changes to the fuel tank module, bucket, wiring or stock lines
- Up to 200 percent more low pressure fuel capacity while utilising the factory system for everyday driving
- Dedicated wiring harness included; add two 9/64 inch power terminals to the tophat
- Add-on assembly only; you retain your original pump
Options
- Pump choice: Supplied as standard with a Walbro 450 pump (F90000274). Optional upgrade to Walbro 525 (F90000285) for increased flow.
- Hobb’s switch: A 4 psi switch is recommended to activate the secondary pump only under boost. The secondary pump must not run full time.
- Lock ring tool: Optional tool recommended to safely remove and refit the tank lock ring and help avoid damage.
What’s included
- Walbro 450 pump (F90000274) with optional Walbro 525 (F90000285)
- Black anodised custom fitting
- Pump brackets
- 9/64 inch terminals and associated hardware
- Fuel line
- Replacement clip
- Wiring harness
Nforcd knows this setup well and it has been a popular, cost-conscious fueling upgrade for S65 owners who want reliable flow for higher power levels while keeping factory manners. Order online today or contact us for advice on pump selection and boost activation options. Professional fitting is available at Nforcd in Warwickshire; request a quote via Sales@nforcd.com.